L&L Plug n Fire Kiln
Plug-n-Fire
8" X 8" X 9" home and test kiln (Cone 10 on 120 volts, 15 amps)
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
KEY SPECS
Small
(0.33 cubic feet)
Cone 10, 2350F, 1290C
8" Square x 9" High (0.33 cu ft)
This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
Kiln plugs into a separate control panel with power and thermocouple wire jack
Door safety switch shuts off power to the elements when the door is opened
Hard ceramic element channels
Includes one 7" by 7" by 3/8" shelf and three 3" posts
Not yet listed to UL499
Includes Genesis-Mini Touchscreen Control
****The Genesis controller includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Plug-n-Fire
8" X 8" X 9" home and test kiln (Cone 10 on 120 volts, 15 amps)
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
KEY SPECS
Small
(0.33 cubic feet)
Cone 10, 2350F, 1290C
8" Square x 9" High (0.33 cu ft)
This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
Kiln plugs into a separate control panel with power and thermocouple wire jack
Door safety switch shuts off power to the elements when the door is opened
Hard ceramic element channels
Includes one 7" by 7" by 3/8" shelf and three 3" posts
Not yet listed to UL499
Includes Genesis-Mini Touchscreen Control
****The Genesis controller includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Plug-n-Fire
8" X 8" X 9" home and test kiln (Cone 10 on 120 volts, 15 amps)
Model PF8 Craft/Test Kiln with a Genesis Mini Touchscreen Controller
KEY SPECS
Small
(0.33 cubic feet)
Cone 10, 2350F, 1290C
8" Square x 9" High (0.33 cu ft)
This kiln can fire to Cone 10 on a standard 15-amp circuit, and draws only 12.5 amps
Extra-insulated sides with 2-1/2" K23 brick and 1" of backup insulation; Top & Bottom are 3" K23 brick
Kiln plugs into a separate control panel with power and thermocouple wire jack
Door safety switch shuts off power to the elements when the door is opened
Hard ceramic element channels
Includes one 7" by 7" by 3/8" shelf and three 3" posts
Not yet listed to UL499
Includes Genesis-Mini Touchscreen Control
****The Genesis controller includes a touchscreen interface and WIFI connectivity. The intuitive interface is easy to use and understand. A free phone app allows you to monitor your kiln remotely.
Insulation: 2-1/2" K23 Firebrick & 1" 1900 Back-Up Insulation on sides, 3" K23 Firebrick on top & bottom
Sections: One section
Inside Dimensions: 8.00"Wide x8.00"Deep x9.00"
High (20.32 cm Wide x 20.32 cm Deep x 22.86 cm High)
Outside Dimensions: 16.00"Wide x19.00"Deep x20.00"
High (40.64 cm Wide x 48.26 cm Deep x 50.8 cm High)
Weight: 77lbs (35 kg)