Firing Service
Time to get Fired up!
Need a place to fire your work? We got you covered!
Fees and Policies
5.00 minimum total firing charge for any firing temperature.
Base cost is calculated in cubic inches (L x W x H) at:
a. $0.04/$0.03/cu inch Low Fire (bisque or glaze)
b. $0.05/$0.04/cu inch Mid Fire (cone 5/6)
c. $0.06/$0.05/cu inch High Fire (cone 10)
Bulk firing costs – For cone 5/6 add 20%, and for cone 10 add 30%.
Skutt 1027 Kiln- $140/full Kiln - $80/half - $45/quarter of 7 cu ft kiln
L&L 9×9×9 Test Kiln- $25/full rental
Want to save some time when dropping pieces off to be fired please fill our this required form and print it out before you come in. You can also save and email it to us and we will print it for you. PDF FIRING FORM
Before Dropping off, please make sure all bisque is bone dry. We have limited space and cannot store work while it drys.
No Glaze on bottoms! Sponging the bottoms of your pieces is a takes us a lot of time time, please make sure the bottoms are clean.
Packing your work for transport. Form, paper, bubble wrap etc. Make sure you pack your work carefully so they survive the drive.
Makers mark/singing your work - Be proud to put your name on your work. It helps up identify your work and limits mix ups and shows the works who made it.
If this is the first time bringing work to us, call us! We’re more than happy to go over some information with you and answer any questions before you drop work off.
Drop off: No appointment or call is needed ahead of time. Feel free to drop off anytime were open Monday through Friday 9:00AM - 4:00PM.
Requirements Clay Gurus does not allow pieces to be glazed on the bottom without calling first for approval.
Pieces that require stilting or excessive glaze cleaning to protect our kiln shelves incur a $1.00 charge each.
Items will be discarded by Clay Gurus 45 days after being fired. If you cannot pick up in that time, please call us.
Filters
No results found
No results match your search. Try removing a few filters.